Standard BS 1610, ASTM C39, NF P18-411, AASHTO T22, GOST 10180-2012
Wall type Welded frame design
50mm piston stroke,
Upper platen spherically seated to allow an inclination of 3°, Hardened 56HRC and fine ground machined.
cube samples up to 200x200x200mm, cylinder samples up to, 150x300mm
Maximum daylight:
-Vertical 375mm between platens
-Horizontal 350mm between side plates
Distance Pieces used for smaller specimens.
.
The load measurement and control: is carried out between 4% and 100% of the capacity with class 1.
Control Unit Features: is “Sematron Touch Series V4′ advanced controller:
Loading, unloading, load control, deformation control, constant load increase adjustable between 0.5 kN/Sec, 25 kN/Sec, or mm/min up to 0.1 micron pace rates (requires additional sensors).
Piston release load automatically at sample break, for simple strength test – ramp loading, 24bit – 1kHz data acquisition and control capability.
The amplifier includes
4 channels for independent incremental digital sensors and 4 separated fully differential analogue channels. 8 channels for logical sensors with SI units, 8 channels for controller parameters.
(PID) control with double loop, automatic gain feature for different sensors, automatic calibration function, extra channel for a 2nd load sensor.
.
Display Unit: 10 inch touch screen LCD.
Built-in software, 4 GB (extendable) internal memory to save test graphics and settings
USB/LAN port to transfer results and connect with internet and PC.
Save results in pdf and excel format, print result, feature directly from Machine – feasible to attach all HP printers also allows mini printer (optional), Email results directly from Machine
.
PC Software: supplied which allows controlling machine with computer, PC software allows same features and menus as Machines display