Tensile, compression, bending etc. tests and can work on both displacement/deformation mode and load control mode (with and without extensometer – optional).
Two column rigid construction.
Load measurement and control, with a load cell of class 0.5 resolution of 20 bits, 1 kHz data acquisition Close-loop controller , Crosshead moving speed (mm/min): 0.001-300.
The electronic control unit of system is with 1000 Hz data acquisition speed.
Synchronization between frame and sensors will be done/controlled by advanced PID or close loop configuration.
Electronic control unit has total 8 channels. Due to these channels, electronic control unit can control 8 no. of sensors at the same time.
Electronic control unit is feasible to attach and control video extensometer, laser extensometer, LVDT, automatic extensometer, strain gauge, load cell, SSI and TTL type sensors.
Special EEPROM sensor plugs can store calibration and sensor data inside it. Due to this feature, control unit can read sensor and calibrate data even if the user changes it with new unit.
User can read and control each attached sensor with the control unit, for example; 2nd load cell, LVDTs and extensometers.
Measurement and control with position encoder of 1 micron resolution, handheld unit to move machine up and down without use of computer to fix sample into the machine easily accurately and safely, testing software, 32 user defined result parameters (connected to load and position), result can be transferred to Excel format (Raw Values).
Power supply 220Volt, 50/60 Hz