Fully Automatic Core Cutting Machine Sample Preparation
Automatic electronic control system
Cut all cylinder core samples from 38mm to 110mm
Typical 3 pieces of 100 x 200with an accuracy of 0.1 degrees
Automatic water spray against dust
The cutting process of 3 samples at the same time is in approximately 120 seconds
Fully automatically the cutting blade automatically returns to the starting Home Position.
.
All mechanical components on the device, including linear guides, linear bearings, slides, and rails, do not come into contact with water.
This design ensures that issues such as rust and deterioration will not occur.
Direct drive system without any external shaft assembly. This eliminates potential problems like changing an external shaft (diamond blade) in the future.
Drainage outlets for dirty water are appropriately sized to minimize problems such as blockages and accumulation. NOTE Base price excludes Water tank system
The device operates with 220-240V, 50-60Hz, 1ph
.
OPTIONAL ACCESSORY
External water tank recirculation system is typically required. One water tank can be used for two Grinding machines Refer Product code 101-C0099-25