This is the same as Machine 101-S0060-50 with a extended stroke of 160mm
Suitable for CBR, Marshall, UCS, Simple triaxial, IDEAL CT, DEAL RT, Cements, Grout, Mortars and other standards
STANDARDS: AS 1289, AS 2341, EN 12697-34, 12697-23, 12697-12, ASTM D6927, D5581, D1559, AASHTO T245, BS 598:107 , NF P98-251-2,
Servo electromechanical Drive system: It has precise stepper motor drive mechanism.
Control unit of machine is advanced controller:
-Loading, unloading
-Constant load increase adjustable between 0.05 kN/Sec – 25kN/Sec-
-Displacement increase adjustable 0,001 mm/min – 60 mm/min,
-Piston Travel Stroke 160mm
-Mechanical piston release load automatically at sample break, for simple strength test
-Ramp loading
-Holding load constant
-Sinusoidal waveform with Loading and Unloading Control.
-1kHz data acquisition and control capability which allows accuracy in control and reading load,
-Special close loop (PID) control with double loop, automatic gain feature for different sensors, automatic calibration function.
-The electronic control unit has 8 channels (4 digital and 4 analogue).
System is supplied with an industrial 10 inch LCD screen (with a high durability to work up to 70 degrees/ -20 degrees C).
The system can be used in “Stand alone Mode” using the built in 10″ LCD screen or by connection to a PC driven from the P
Dynamic and Static Tests can be carried out on computer the Universal Testing Software.
Real time data, test graphs and results can be observed on software.
Results and graphs can be saved on computer and printed.